SENSOLUX Micro-energy-controller, 1-channel Function: In full automatic mode, the SENSOLUX Solar-presence detector article no. 482 FU-BM DE registers the presence of persons and switches on the lighting via the receiver. When no more movement is detected, the light is switched off with a settable light-on time or when a specified light value (daylight) is reached. However, the user can at any time switch the lighting on or off via conventional or Easyclick radio control buttons. In semi-automatic mode, the lighting is switched on manually and switched off via the presence detector. The light-on time, light level, daylight or twilight parameters can be set in both modes. The default factory mode is full automatic. Technical data: Receive frequency/radio protocol: 868.3 MHz/EnOcean Supply voltage/internal consumption: 230 V~/50 Hz/0.3 W Ambient temperature: +5 to +50 °C Protection class/approvals: IP 20/CE Connection data per channel: Filament lamps: 2300 W Inductive load: 600 VA Electronic ballast: max. 5 pieces Housing dimensions: 47 x 39 x 23 mm Connections: Screw terminals Up to 8 solar presence detector and 8 Easyclick transmitters can be trained. Neutral conductor necessary.