Electrical installation without long wires


A convincing answer in building biology terms, too! The signal jumps over. A comparative study of the emissions caused by Easyclick radio signals conducted by the ECOLOG Institute. Wall-mounted radio transmitters can actually reduce the electro-smog load in the home and the office. Wall-mounted radio transmitters cause approx. 100 times less high frequency emission than conventional light switches. Low frequency pulsed AC is substantially reduced thanks to the drastic reduction of hard wiring and cables inside the building.

Application examples   Schematic diagram   Components used


Flexible and straightforward positioning of wall-mounted transmitters

A 2-channel wall-mounted transmitter can be used to switch a light source with two 2 pushbuttons ON and OFF via an Easyclickpro 1-channel flush-mounted receiver. The wall-mounted transmitter can be positioned just about anywhere and the system can be extended at any time in the form of additional wall-mounted transmitters and the miniature hand-held transmitter.

 

   Easyclick-Anwendungsbeispiel 1  


Easyclick wall-mounted transmitter, 2 channels
20.450.xx FU-BLS

Easyclickpro flush-mounted receiver 1 channel
451 FU-EBI o.T.

Inexpensive switching, with 2 pushbuttons

Using just one 2-channel wall-mounted transmitter it is possible to switch two electrically powered units (independently of each other) via an Easyclickpro 2-channel flush-mounted receiver. Each pushbutton switches an electrically powered unit ON/OFF/ON.

 

  Easyclick-Anwendungsbeispiel 2  

Easyclick wall-mounted transmitter, 2 channels

20.450.xx FU-BLS

Easyclickpro flush-mounted receiver 2 channels
452 FU-EBI o.T.

User-friendly ON and OFF
without any risk of confusion

Each of the two pushbuttons on a 2-channel wall-mounted transmitter performs the same function; both pushbuttons can thus be used without risk of confusion, to switch ON/OFF/ON via an Easyclickpro 1-channel baldachin receiver in a lamp.
 

  Easyclick-Anwendungsbeispiel 3  

Easyclick wall-mounted transmitter, 2 channels

20.450.xx FU-BLS

Easyclickpro baldachin receiver 1 channel

451 FU-BEBI

Switch lights and control blinds with the Easyclickpro-comfort handheld transmitter

This means even more comfort and safety, because the Easyclickpro-comfort handheld transmitter automatically switches lights and controls blinds with individually selectable switching times using the Easyclickpro receivers. Manual operation on the Easyclickpro-comfort handheld transmitter is also possible and intelligent additional function such as party, vacation and holiday functions are easily set using any radio channel. For the local blind control a Easyclick wall transmitter is used. Lock out protection for the terrace door and window contact.

 

  Easyclick-Anwendungsbeispiel 4  

Easyclickpro-comfort handheld transmitter

450 FU-HS 128

 

Easyclickpro flush-mounted receiver 1 channel
451 FU-EBI o.T.

 

Easyclickpro adapter receiver
4511 FU-EBIM ST

 

Easyclickpro flush-mounted JR receiver,

2 channels
452 FU-EP JR o.T.

 

Easyclick wall-mounted transmitter, 2 channels

20.450.xx FU-BLS JR

 

Easyclick window contact

450 FU FK

 

Refitting of a on/off switch to an alternating switch or a cross connection

For this the on/off switch is replaced with an Easyclickpro in-wall receiver with support plate and a button fixture is attached. With this the known switch is kept and retains its function. After removing the button fixture of the Easyclickpro in-wall receiver the functions and parameters can easily be changed due to their easy accessibility. Additional switch buttons are offered with Easyclick wall transmitters that are adjusted to the receiver and are simply attached to the wall. 

 

  Easyclick-Anwendungsbeispiel 5   Easyclickpro flush-mounted receiver with support plate
451 FU-EBI o.A.


Single button fixture xx.420.xx


Easyclick wall-mounted transmitter, 2 channels
20.450.xx FU-BLS

Convenient lighting circuits

With just one 4-channel wall-mounted transmitter up to four light scenarios can be activated. First of all the Easyclickpro flush-mounted receivers are individually positioned according to the associated wall-mounted transmitters. The light scenario can now be stored using one of the pushbuttons provided on the 4-channel wall-mounted transmitter. Meaningful light scenarios might include, for example, television, reading, dining, visitors, frequently used passages through the house, and many more besides. The UP/ DOWN functions of the shutters receiver can also be included in the above scenarios. The light scenarios can of course be adapted at any time to meet new or modified needs and situations.

  Easyclick-Anwendungsbeispiel 6  

Easyclick wall-mounted transmitter, 2 channels 20.450.xx FU-BLS (for local operation)

 

Easyclick wall-mounted transmitter, 4 channels 20.455.xx FU-BLS (for four light scenarios)

 

Easyclickpro flush-mounted receiver 1 channel
451 FU-EBI o.T.

 

Easyclickpro adapter receiver
4511 FU-EBIM ST

 

Easyclickpro baldachin receiver, 1channel
451 FU-BEBI

 

Double button fixture xx.425.xx

 

Easyclickpro flush-mounted JR receiver with support plate
452 FU-EBI JR o.A.

 

Staircase lighting - switching ON and, after a settable time and after an advance warning, switching OFF automatically

This improves safety immensely; before the light switches off automatically, it flashes a brief advance warning and if necessary a wall-mounted transmitter can then be activated again in good time. The wall-mounted transmitters can be positioned according to the user's real need, e.g. in spots where you have always wanted to place a switch, e.g. to reduce the number of dark zones one has to cross.
.

 

  Easyclick-Anwendungsbeispiel 7   Easyclick wall-mounted transmitter, 2 channels 20.450.xx FU-BLS

 

alternatively with luminescent frame
20.450.56

 

Easyclickpro flush-mounted receiver 1 channel
451 FU-EBI o.T.

Controlling the lighting and ventilation in the bathroom and guest toilet

With a 2-channel wall-mounted transmitter the light can be switched on via an Easyclickpro 2-channel flush-mounted receiver  and after approx. 3 min. the ventilation can be switched on too. The ventilation is switched OFF again automatically after a settable time from when the light is switched off.

 

  Easyclick-Anwendungsbeispiel 8   Easyclick wall-mounted transmitter, 2 channels
20.450.xx FU-BLS

 

Easyclickpro flush-mounted receiver 2 channels
452 FU-EBI o.T. (for light and ventilation)

 

Controlling the shutters either individually or centrally
Two sets of shutters can be controlled via one Easyclickpro flush-mounted JR receiver - individually using two 2-channel wall-mounted transmitters or, with an additional -channel wall mounted transmitter, they can be controlled centrally. This control flexibility can be modified and extended at any time.

  Easyclick-Anwendungsbeispiel 9

  Easyclick wall-mounted transmitter, 2 channels
20.450.xx FU-BLS JR (for local operation)


Easyclick wall-mounted transmitter, 2 channels
20.450.xx FU-BLS JR (for central operation)


Easyclickpro flushmounted JR receiver, 2 channels
452 FU-EBI JR o.T.

Plug adapter receiver Easyclickpro switch with a mini hand transmitter

A battery-free 4 channel hand transmitter switches floor or table lamps with one button respectively with an Easyclickpro plug adapter receiver. These are easily programmable, whereas additional transmitters can activate additional functions - such as automatic switching off after a selected time. Naturally the mini hand transmitters can also be integrated into the other application examples.

  Easyclick-Anwendungsbeispiel 11   Easyclick miniature hand-held transmitter, 4 channels
450 FU HS 4


Easyclickpro adapter receiver
4511 FU-EBIM ST


Easyclick wall-mounted transmitter, 2 channels
20.450.xx FU-BLS